Frequently Asked Questions
Product and Use
Does the Oasis Face Shield fit all magnification loupes and/or lights?
We have worked tirelessly to create a face shield and adapters that fit the magnification loupes and/or lights on the market. Our market research to-date has shown a 100% fit of the Oasis Face Shield on the magnification loupes and/or lights that we have had access to test. The face shield fit has been tested for magnification loupes and/or lights that protrude horizontally from the face up to 4.5 inches. Since it is impossible for us to test all combinations of magnification loupes and/or lights on the market, prior to buying, place your loupes and/or light on your face, and measure from the bridge of your nose to the end of the magnification loupes and/or light (see picture here). If your magnification loupes and/or light protrudes longer than 4.5 inches horizontally from your face, please contact us prior to purchasing so we can assist with the fit, and to determine if the Oasis Face Shield will work for you. You can use the Contact Us form or e-mail us directly at: help@oasisfaceshield.com.
Are there any product disclosures, disclaimers, or warnings for the Oasis Face Shield?
Safety first. Your safety is our main concern. There are some pertinent FDA informational disclosures that we want to openly communicate to you so that your safety is maintained, and to ensure that we are transparent in our information so that you can decide if our product meets your requirements.
- The Oasis Face Shield is a “Refreshingly Different” face shield for general medical or dental purposes. It is intended to be a multi-use face shield for one healthcare professional.
- The product has not been FDA cleared or approved.
- The product has been authorized by the FDA under an EUA for use by healthcare providers as personal protective equipment.
- This product is only authorized for the duration of the declaration that circumstances justifying the authorization of emergency use under Section 564(b)(1) of the Act, 21 USC 360bbb-3(b)(1) unless the authorization is terminated or revoked sooner.
The following are important product disclaimers and product warnings:
- Has not been tested for use in a medical/dental setting, and makes no claims about the ability to prevent the transmission of infectious disease, or to provide protection.
- Does not have antimicrobial, or antiviral properties or materials.
- Is not an impact-resistant face shield, and should not be used in such environments.
- Is not sterile; therefore, should not be used in environments where sterility is required.
- Should not be used in environments where there is high exposure to flammable gas and/or heat source.
- Should not be used where there is a high volume risk or high volume exposure to other potentially infectious material (OPIM).
- Is not meant to be a substitute for other facial personal protective equipment (PPE). It can only be worn in addition to other facial PPE to include at a minimum: OSHA/FDA/CDC/etc. cleared safety glasses and/or loupes with appropriate side shields, and appropriate level filtration mask, etc. DO NOT wear the Oasis Face Shield with loupes and/or safety glasses that are not OSHA/FDA/CDC/etc. cleared, and that do not have appropriate side shields.
- Inspect your Oasis Face Shield prior to each use. Please evaluate and discard immediately if any of these are identified on your Oasis Face Shield: cracks, holes, scratches, creases, or damaged, loose, or compromised face shield component(s), etc.
How do I clean the Oasis Face Shield and adapters?
So fresh and so clean. The Oasis Face Shield is a “Refreshingly Different” face shield for general medical or dental purposes. It is intended to be a multi-use face shield for one healthcare professional. Wear appropriate PPE, and clean gloves to protect against cross-contamination when cleaning and disinfecting soiled face shield. Adapters (Loupes’ Frame Adapter and Face Shield Adapter), Non-latex Bands, and Retention Clips: hospital grade-disinfectant used accordingly to directions. Face Shield Sides, and Front Plastic Sheet with Retention Bumps: warm, soapy water only as any other disinfectant can remove the anti-fog coating on the Front Plastic Sheet. A soft, microfiber towel can be used to dry and buff out any spots after cleaning. Do not use paper-containing products to dry as it will scratch the plastic.
Can I wear the Oasis Face Shield as a replacement for other facial personal protective equipment (PPE)?
More is better. The Oasis Face Shield is not meant to be a substitute for other facial personal protective equipment (PPE). It can only be worn in addition to other facial PPE to include at a minimum: OSHA/FDA/CDC/etc. cleared safety glasses and/or loupes with appropriate side shields, and appropriate level filtration mask, etc. DO NOT wear the Oasis Face Shield with loupes and/or safety glasses that are not OSHA/FDA/CDC/etc. cleared, and that do not have appropriate side shields.
How does the Oasis Face Shield compare to other face shield designs?
Seeing is believing. We love peer-reviewed articles discussing face shields currently on the market, and design issues. See the peer-reviewed article here. You can compare how our improved face shield design addresses the current design problems of the competition.
What is the Oasis Face Shield made of? Can you provide the SDS sheets for your Oasis Face Shield?
Absolutely! Sharing is caring. 1) Face Shield Sides: Polyester. 2) Front Plastic Sheet: Polyester With Double-Sided Anti-Fog Coating. 3) Retention Bumps: Polyurethane. 4) Retention Clips: Polycarbonate. 5) Adapters (Loupes’ Frame Adapter and Face Shield Adapter): Thermoplastic Polyurethane. 6) Non-latex Bands: Synthetic Rubber. Latex notice: Materials have been manufactured in the same facilities and machines that manufacture latex-containing products. Please be advised for users with latex allergies. Want the SDS forms . . . Here you go . . . Use this link.
Product Solutions and Hacks
Uh oh . . . I lost my instruction manual sheet with Retention Bump template. I need the instruction manual sheet to read the directions, and to use as a template for the Retention Bumps. What can I do?
I want my Oasis Face Shield to cover more of my neck area. Is there anything I can do?
We have an “Oasis Face Shield Hack" for you to solve this problem. See instruction video here. Gently snip the bottom end of the channel on each side of the Oasis Face Shield Side, and move the Front Plastic sheet with installed Retention Bumps down to where you want the coverage, and lock back into place using the Retention Clips. It’s that easy!
My loupes and face shield are sliding forward when I look down. How can I fix that?
We have a solution! Your magnification loupes should have come with a strap that is tightened behind the neck to counteract the weight of your magnification loupes, light, and face shield. If you notice your magnification loupes, light, and face shield are slipping forward on your face, tighten the strap. You may need to get a new strap for your loupes if the strap continues to loosen. If you notice your Loupes’ Frame Adapters getting loose, or you are replacing your Loupes’ Frame Adapters, always use new Oasis Non-Latex Bands for better stability. Need new Loupe Frame Adapters and Non-Latex Bands? You can buy some here.
Ugg . . . My cord for my loupes’ light is not managed, and getting in the way. Do you have a solution for that?
Sure do . . . We have another “Oasis Face Shield Hack" for you! Use one of the extra Non-Latex Bands, and loosely secure it to the middle of the Loupes’ Frame Adapter on the side you want the loupes’ light cord to go. Start wrapping the Non-Latex Band around the loupes’ frame, light cord, and secure it back on the middle of the Loupes’ Frame Adapter when it is secure enough. Just make sure the Non-Latex Band is not too tight as to pinch the loupes’ light cord. See picture here. Problem solved!
My ears hurt from wearing a mask all day. How can the Oasis Face Shield help with that?
Oh man . . . we hear you . . . ear fatigue from masks . . . so brutal! “Oasis Face Shield Hack” here for the win. Instead of putting the ear loops of your mask on your ears, loop them over the Oasis Face Shield Loupes’ Frame Adapters instead. Ah . . . so refreshing. See picture here. Just make sure that you can get the required seal of your mask when doing this as to maintain safety in seeing your patients.
General Information
Where is the Oasis Face Shield Made?
USA Proud! The Oasis Face Shield is proudly made in the United States. We believe in creating local sources of personal protective equipment (PPE), and facilitating financial investment within the United States.
Who sells the Oasis Face Shield product?
The Oasis Face Shield product is proudly manufactured and sold by KTI LLC.
Has the Oasis Face Shield been awarded a patent?
We are so proud to announce that the Oasis Face Shield is patented (Patent 11,243,417). Our face shield and adapters have proprietary designs that are unique to the market, and we look forward to providing a face shield product that exceeds the needs and expectations of professionals that wear a variety of magnification loupes and/or lights.
Policies
What is the Oasis Face Shield Shipping Policy?
OMG . . . We are so excited that you are so close to experiencing the “Refreshing Different” Oasis Face Shield. We want to be super transparent in how fast you will receive your order. See our complete Shipping Policy for all things you want to know about receiving your Oasis Face Shield.
What is the return and refund policy for the Oasis Face Shield?
If you are happy, we are happy. If there is a problem, we want to fix it. Whereas we cannot accept product returns due to the nature of the product and current state of affairs, we want to work with you to find a solution. Please contact us within 21 days of receiving the product using the the Contact Us form or e-mail us directly at: help@oasisfaceshield.com. See our complete Return and Refund Policy for more information.
What if I have a suggestion or comment for the Oasis Face Shield product?
Our customers are what drives us to be better. Have a suggestion? Have a comment? We absolutely want to hear it! Submit your suggestions and/or comments using the Contact Us form or e-mail us directly at: help@oasisfaceshield.com.